+8801785948583

Switchgears

#

LT Panels

# LT Panel is an electrical distribution board that receives power from generator or transformer and distributes the same to various electronic devices and distribution boards. Such panels are used in industries both for internal and external use and, therefore, they are quite rugged to withstand different climatic conditions. Our LT panels are designed to work with low electricity consumption that makes them cost effective

LBS Panel

# Load Break Switch is a 3-pole switch to break 11kV supply in HT installations, which conforms to IEC 62271-1 standards. Load Break Switches are mounted within metal clad enclosures called LBS Panels. The unique Arc Quenching mechanism makes it capable of breaking normal loads and fault loads. This can be operated on loads up to 1MVA capacity, substituting VCB or a Pole mounted GOS. LBS panels are of a fixed type switch having 3-poles and a spring loaded shaft driving the moving contacts towards the fixed contacts. This is equipped with a trip-free mechanism for opening. LBS can be Tripped by hand push-button, shunt trip coil or a fuse-trip mechanism.

MCC Panels

# MCC stands for motor control center. It consists of feeders for motors and blowers. Feeders are designed according to the motor rating. In most of the MCCs, auto/manual provision will be there. With manual provision motors can be operated manually. In auto provision external signal is required to start the motor. The signal is given by the control panel. Indicators for the motor operation also will be present in control panel. A motor control center (MCC) is an assembly of one or more enclosed sections having a common power bus and principally containing motor control units. Motor control centers are in modern practice a factory assembly of several motor starters. A motor control center can include variable frequency drives, programmable controllers, and metering and may also be the electrical service entrance for the building.

ATS Panels

# ATS stand for (Automatic transfer Switch). ATS panel is one of the systems that switch the power supply from KESC/WAPDA to Generator. ATS panel system automatically detects the power failure of the primary power supply and switches the generator ON and when the primary power supplies restores again ATS panel turns OFF the generator and switch the system to power supply from generator to primary supply. POWER PROTECTION SERVICE creates two types of ATS panel. One ATS panel system is automatic only and one ATS panel system contains automatic with manual handling as well. The big disadvantage of fully auto ATS panel is that when an internal motor or contactor fails then the whole system will not be able to work, while in auto manual ATS panel system user will be able handle the system manually in case of any failure. Power failure is very rapid in our country and public and private sector are pretty much disturbed by this, a generator as a back up power supply system is always good to have. Generator provides uninterruptible power supply to fulfil your need, but some time it is hurdle to start the generator and people are being suggested ATS panel for starting generator automatically.
ATS panel uses voltage regulators and replay to control the voltage ups n down, Power Protection Services uses best switch gears, contactor, breakers, relays and timers in their ATS panel panels which guarantees the reliability and long lasting performance of the ATS panels. We have installed our ATS panels in many public and private sector including every NADARA passport office.

Distribution Boards (DB)

# Distribution boards make an essential part of any circuitry in your homes, offices or any other place. They serve an important purpose and cannot be ignored at any cost. One of the most important devices, they make sure that the current is properly distributed to all the devices allowing proper functioning. This also makes sure that none of the devices suffer from the effects of over currents or short circuits. The Havells range of distribution boards are elegant when it comes to their looks. They fit in perfectly with the interiors of your homes, adding to the aesthetics. Available in different colors, the designer DBs serve a dual purpose. They not only save you from the harmful effects of current but also make your walls magnificent. The horizontal and vertical DBs give you the flexibility to choose the ones that are right for you. Choose from the range of distribution boards available online at amazing prices on the Havells store and get protection delivered to your home without any hassle.

Customized Panels

# Being a well known manufacturer and supplier in the market, we are providing MV LV Switchgear Panels to our valuable customers. These are made under the guidance of experienced professionals by using premium quality materials. This panel is used for protecting and isolating electrical equipment. These panels are tested on different predefined quality parameters before providing to customers. MV LV Switchgear Panels can be availed in various specifications by our valued customers.